Generac 9600-3 Manuale Utente Scaricare il pdf (Pagina 15)

ENGINE AIR CLEANER

Clean and re-oil the foam pre-cleaner every three

months or every 25 hours of operation, whichever oc

curs first. Service the foam pre-cleaner more frequently

if you operate the generator in extremely dusty or dirty

conditions (Figure 10):

Turn KNOB counterclockwise to loosen.

Remove COVER, FOAM PRE-CLEANER and PA

PER FILTER.

Remove foam pre-cleaner from cover.

Wash foam pre-cleaner in liquid detergent and

water.

Wrap foam pre-cleaner in a cloth and squeeze dry.

Saturate foam pre-cleaner in enoine oil. Squeeze

to rerTK}ve excess oil and to distribute oil.

Install foam pre-cleaner into cover, followed by

paper filter. Tabs at edges of paper filter must lock

into slots on cover.

Insert bottom locking tag of cover into slot. Install

cover, foam pre-cleaner and paper filter.

Once each year or every 100 operating hours (which

ever comes first), replace the paper filter. The new

replacement filter must be a flame retardent type.

FOAM

PRE

CLEANER

COVER

KNÒB

Figure 10— Engine Air Cieaner

CLEAN AIR INTAKE SCREEN

Clean all foreign material from the air intake screen

(Figure 11) at least once every 100 hours of operation.

Clean more often, if necessary.

Inspect the area around the generator exhaust muffler

periodically and remove all grass, leaves, dirt, etc. from

this area.

Figure 11 —Areas to Clean on Air Intake Screen

ENGINE SPARK PLUGS

Clean engine spark plugs and reset gap to 0.030 inch

(0.8mm) every 100 hours of operation (Figure 12).

Clean by scraping or wire brushing and washing with

commercial solvent. DO NOT BLAST CLEAN SPARK

PLUGS.

CAUTION: Sparking can occur If wire terminals do

not fit firmly over spark plug terminal ends. If nec

essary, reform wire terminals to obtain a tight fit

FUEL FILTER

Remove and replace fuel filter (Figure 13) every 100

hours of operation or once each year, whichever comes

Figure 13 — Fuel Filter

-13-

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Commenti su questo manuale

Nessun commento

Generac 9600-3 Manuale Utente Pagina 15

Commenti su questo manuale

Prodotti e manuali riguardandi Generatori Generac 9600-3